Husqvarna 525P4S Pole Saw Review
When you buy through the Amazon links on this page, we may earn a commission at no extra cost to you. Learn more
Last updated October 31, 2026
The Husqvarna 525P4S is a good buy for anyone who prunes tall trees regularly and wants gas power that holds up through a long session on a long, stiff shaft. It is not a telescopic pole saw: the shaft is fixed at about 96 inches including the bar, so it does not extend or collapse. If you expected to shorten it for storage or stretch it for extra height, that is the fact to settle before anything else.
It has the 25.4-cc X-Torq engine, the 12-inch bar and the near-8-foot rigid shaft. It fits homeowners with several tall trees and repeat seasonal work, and light commercial or landscaping use.
What the Husqvarna 525P4S does well
The 525P4S is built around a 25.4-cc two-stroke X-Torq engine that puts out 1.36 hp and 1.22 Nm of torque at 6,700 rpm, with a chain speed of 80.3 ft/s at max power.
Reach and stiffness
The tool measures 95.7 inches including the bar and chain, and Husqvarna markets up to 13 ft of reach.
Bar and chain
The 12-inch bar runs a 3/8-inch mini, .050-inch gauge H37 chain with 45 drive links.
Starting a cold engine
Comfort and control
LowVib anti-vibration, a padded ergonomic handle, a magnesium clutch housing, a rear impact guard and a metal skid plate all come on the saw. The chain tensioner works without tools, the automatic oiler is adjustable, and a single harness ships in the box. The limited warranty runs 2 years.
Where the 525P4S Runs Out of Headroom in Real Yard Work
The fixed shaft is the first trade-off. It gives you stiffness at the cut, but the saw stays roughly 8 feet long in the truck, in the shed and in the garden, and you cannot shorten it for close work.
Weight in hand
The saw weighs 16.7 lb, and a fueled, oiled unit with the bar and chain mounted is heavier still. This is a two-handed tool, and the harness is not optional for long sessions at full extension.
Two-stroke ownership
The engine runs on a 50:1 mix of gas and two-stroke oil, so you buy and store both. The carburetor and air filter need regular care, and old fuel is the usual reason a two-stroke refuses to start.
Noise and vibration
The saw puts out 91 dB(A) at the operator's ear and 107 dB(A) guaranteed sound power, with 3.2 m/s² of vibration at the rear handle. Hearing protection is required.
What it is not for
This is a limbing and pruning tool. It is not for felling.
The product in this review
Husqvarna 525P4S pole saw
See on AmazonReading the 525P4S Spec Sheet Before You Commit
| Spec | Figure |
|---|---|
| Engine | 25.4-cc 2-cycle X-Torq, 1.36 hp |
| Bar and chain | 12 in bar, 3/8 in mini pitch, .050 in gauge, H37 chain, 45 drive links |
| Chain speed | 80.3 ft/s at max power |
| Length | 96 in including cutting equipment, fixed |
| Reach | Up to 13 ft working height |
| Weight | 16.7 lb |
| Fuel | 50:1 mix, 17.25 fl oz tank |
| Oil tank | 0.4 US pint, adjustable automatic oiler |
| Noise | 91 dB(A) at the ear, 107 dB(A) LWA |
| Vibration | 3.2 m/s² rear handle |
| Warranty | 2-year limited |
What up to 13 feet of reach really means
The 13-foot figure is a working height, not a pole length. It adds the roughly 8 feet of tool to your own body and arm height, with the shaft held close to vertical.
The fixed shaft means the length is what it is: no extending for a high limb, no collapsing for a low one.
What the 525P4S Cuts Through When You Raise It to a Branch
The 12-inch bar and 1.36 hp engine handle green limbs in the 6 to 8 inch range. Thicker hardwood takes a two-sided cut or a step cut.
A bar at least a couple of inches longer than the branch diameter keeps the tip clear of the limb, which lowers the risk of kickback.
Power stays steady across a session, which is the real advantage of gas at this reach. These are expectations drawn from the engine and chain figures, not timed cuts.
Carrying the 525P4S Around the Yard and Working Overhead
Fuel routine
Protection on the job
Keeping the 525P4S Cutting Cleanly Through Season After Season
The saw takes a 12-inch bar and an H37 chain in 3/8-inch mini pitch, .050-inch gauge, with 45 drive links.
Filing the chain
Tension and oil
End of season
Staying Safe While You Work the 525P4S Overhead
Keep bystanders well clear, about 50 ft away, and stay at least 10 m from power lines. Never work from a ladder, never stand under the limb being cut, keep both hands on the tool.
Wear hearing protection for the 91 dB(A) noise, plus eye protection, gloves and head protection where branches can fall.
The Husqvarna 525P4S is a capable, well-built gas pole saw for the buyer who needs steady power on a long rigid shaft and will use it regularly through the season. The fixed shaft and the two-stroke upkeep are the trade-offs you accept for that stiffness and that reach.
It suits homeowners with several tall trees and light commercial work, and it is the wrong tool for occasional pruning or for anyone who needs a saw that collapses. Check the product card for the current price and availability.
Frequently asked questions
The fixed shaft and the 13-foot reach figure are the two points that decide whether this saw fits your yard, and both are easy to misread.
How much fuel does the Husqvarna 525P4S hold between refills?
The Husqvarna 525P4S carries 17.25 fl oz of fuel in its tank, mixed with two-stroke oil at 50:1.
How much bar oil does the Husqvarna 525P4S hold, and can the flow be changed?
The bar oil reservoir on the Husqvarna 525P4S holds 0.4 US pint. The automatic oiler is adjustable.
Does the Husqvarna 525P4S come in other bar or shaft versions?
You get one setup: a 12-inch bar with a matching H37 chain and a fixed shaft about 96 inches long including the bar. The shaft does not telescope, and no other bar length or shaft version is given.
What does the X-Torq engine on the Husqvarna 525P4S do about exhaust and fuel use?
The 25.4-cc X-Torq two-stroke in the Husqvarna 525P4S is built to lower emissions and fuel consumption. Output is rated at 1.36 hp.