DeWalt DCCS672B Cordless Chainsaw Review

The carton holds the chainsaw, a bar sheath and the tensioning tool. Nothing else ships with it, and that is the detail that catches most people out: no battery and no charger are included.

If you already run DeWalt packs of the right type, the saw is a straight add to your kit. If you don't, the pack and charger are a separate purchase, and the saw will not run until they arrive. It also needs a compatible high-voltage pack, so a standard low-voltage battery will not power it.

The 18-inch bar sets the reach of each cut, and the brushless motor is the part that turns battery power into torque without the wear of brushes. At 2.85 hp, the saw sits in the class of a mid-size gas saw, which is why it can take on firewood rounds instead of just twigs.

The dimensions describe a saw roughly 39.5 inches long from end to end, so plan storage and transport around a full-size bar rather than a compact trimmer.

Cutting performance is the strongest theme in buyer feedback. Buyers on Amazon most often praise how the saw cuts, with one customer noting it goes through oak and maple easily and another reporting 18-inch oak logs handled in under 30 seconds. That cutting speed lines up with what the brushless motor and the bar are built for.

Power draws positive mentions too, and the 2.85 hp brushless motor is the reason: it has enough grunt for bucking and limbing medium hardwood without bogging down on every cut.

Balance and weight come up as a plus. Buyers describe the saw as well balanced and comfortable to handle, which matters on ground work where you reposition constantly between cuts.

Quality and reliability are the two most-mentioned topics in buyer feedback, and both lean positive. The saw also runs quieter and with less vibration than a gas saw, so it suits suburban lots and tires you out less over a long session.

Put together, this is a saw for many short cuts rather than one long sustained cut: limbing, bucking firewood and storm cleanup are its home ground.

The bare-tool packaging is the defining limitation. Without a compatible pack and charger, the saw is a paperweight, and that separate purchase changes what the whole setup is worth to you.

Battery life splits buyers. Some find a pack lasts long enough for the job, others report it dies quickly, and the mixed verdict shows up across dozens of mentions. Runtime, not power, is the real constraint, so keep a second pack on hand for bigger jobs.

Chain durability is the most consistent complaint. Buyers on Amazon report the chain coming off regularly and the tensioner wearing out quickly, and this is the one weakness worth taking seriously before you buy.

Value divides opinion as well: some buyers consider the saw worth the money, others find it too expensive, largely because the battery is bought separately.

It is also a medium-duty ground saw. Sustained felling of large timber is beyond what an 18-inch bar and a battery pack are meant to do.

The saw needs a compatible high-voltage pack. A standard low-voltage battery will not run it, so check what you own before ordering.

Because runtime is the real constraint on this saw, plan for a spare pack on any job that runs past a quick cleanup. Charging time depends on the charger you use, so the wait varies with your setup rather than following one fixed number.

This is where the bare-tool decision becomes practical. If compatible packs are already in your garage, the saw slots in with no extra spend. If not, factor the pack and charger into the decision before you commit.

The motor is not the bottleneck. The tank is small, so managing runtime is the skill that keeps the saw cutting.

Chain retention and tensioner wear are the most common complaints among buyers, and most of those reports trace back to tension and seating rather than a faulty saw.

• Check chain tension before each use, and often during the first hours of a new chain.
• Seat the tensioning pin in the bar's adjustment hole before you tighten anything.
• Tighten the bar nuts firmly.
• Pull the chain a little off the bar and confirm it snaps back into place.

Buyers repeatedly describe the saw as well balanced and comfortable, and that balance is what makes a full-size bar manageable on the ground.

It runs much quieter and with far less vibration than a gas saw, which helps on a suburban lot and over a long afternoon.

The saw suits ground work with plenty of repositioning. Overhead work and long sustained cuts are where a cordless saw of this size asks more of you than it should.

Chain tensioning comes first. Check it before every use with the included tensioning tool.

One buyer notes the saw uses oil liberally, so keep extra bar oil on hand and check the reservoir before each session.